Aero Cleat Tensioner 3-4mm, aluminium cleat

clamcleat_cl828-70ancl8   k826-11 & 828-68 alternative-riggingcl8   k826-11 & 828-68 move-on-ropecl8   k826-11 & 828-68 riggingcl8   k828-70 rigging 4-1
Leer más
Código Fuerza
[daN, ~kg]
Carga de trabajo
[daN, ~kg]
Peso Estado de stock Precio
CL828-70AN 280 84 23 g
$13.00($13.00 sin IVA)
  • Descripción
  • Especificaciones
  • Comentario

Clamcleat. For ropes Ø 3 to 4 mm. Can rig 4:1. Hard anodised aluminium cleat.

The Clamcleat® CL828-70 alloy Micros Aero cleat has a becket for rigging with a 4:1 ratio. It is simple to rig and adjust. The position of the cleat on the rope can be adjusted by hand - no tools required. Use for antenna masts, wire antenna systems, sports netting, canvas structures and tie-downs. This cleat can be used also for fitness equipment to adjust the step height.

Dimensions: 60 x 13 x 32 mm


How long do cleats last?

This really depends on how cleats are used. We often see nylon cleats that are over 10 years old, when they have been used for light loads on control lines. However, tensioning a rope by dragging it back through the teeth will quickly burn out a nylon cleat. This is why alloy cleats were originally developed. Alloy cleats withstand this type of use, as long as the rope is clean. A dirty rope that is full of sand will wear out any fitting. Windsurfers and kitesurfers who have to rig on coral sand beaches certainly know that their equipment has a limited life. Hard anodised cleats have slightly better wear resistance than silver ones. Nylon cleats are completely resistant to salt water corrosion. They are also resistant to many acid and chemicals. Alloy cleats have "excellent” corrosion resistance. Hard anodised cleats have slightly better corrosion resistance than silver ones.

pdfReview in RadCom 2020-09
This article is copyright of the Radio Society of Great Britain and reproduced with their kind permission.


Fuerza [daN, ~kg] 280
Carga de trabajo [daN, ~kg] 84

Lista de los comentarios:

No hay comentarios escritos todavía.